Engineering sealing door

Good sealing performance, double-layer metal plate with a handle, opening on both sides, tubular seal strip, hot-dip galvanized.

 

Article-No.

Specification

Remark

1066.6601

2000x760

Standard door

1066.6602

2000x760

Stainless steel door

1066.6603

2000x760

With pressure relief hole—for dust filter room

1066.6604

2128x608

Inspection door for RPF/AHU with sight glass

 

Metal and Spark Detection

Our company represents products from Ampere Corporation.

Various metal detection and spark detection removal devices

 

Light-tube heater

The air duct heater pre-treats and re-treats the air in the air conditioning system.

If the air is heated by a tubular heater before being treated with water, it serves as a preheater, raising the air temperature and enhancing its humidification capacity.

If the air, after being treated by water, is heated by a finned-tube heater, it becomes a re-heater, used to compensate for the insufficient heat in the workshop.

Light-tube heaters can be installed either in series or in parallel. When the volume of air to be heated is small and a higher temperature rise is required, a series configuration is recommended; conversely, a parallel configuration is more suitable.

Customize in various sizes

 

 

Entire preheating room / Entire analysis room

For the processes used in ETO sterilization, Aijin Company provides a complete solution for preheating and decompression chambers, covering design, supply, installation, and commissioning.

The entire equipment has already been widely adopted by companies such as Aomei Medical and Weijian Medical.