Waterstop It is one of the main components of the spray chamber. Not only does it have the ability to separate air from water, but it also plays a role in smoothing and evenizing the airflow. The so-called... Waterstop The flow rate refers to the amount of water that passes through. Waterstop The amount of water droplets still carried by the ejected air afterward. This portion of water, along with the air, travels directly into the workshop through the ductwork, where it absorbs heat and subsequently evaporates within the ducts or the workshop itself. It transforms into water vapor, thereby increasing the moisture content and humidity of the air.

Practical experience with air conditioning has shown that supplying air with an appropriate amount of water—air supplemented with moisture—can significantly reduce the volume of air supplied to the workshop. This is mainly because, once these water supplements are introduced into the workshop, they absorb some of the heat within the space, thereby reducing the workshop’s waste heat. As a result, the workshop’s residual heat is greatly minimized. Under the same enthalpy difference for supply air, a reduction in the air volume also leads to a decrease in the amount of water sprayed onto the floor. Clearly, using water to supplement the air helps lower the energy consumption of air-conditioning systems.

However, for workshops that require relatively low relative humidity, when the cold-source temperature is relatively high, measures should be taken to reduce the amount of water flowing through the baffles. Waterstop It can serve as a key component for separating water and air in various air-conditioning spray chambers. Featuring a simple structure, it is easy to load, unload, and clean. Our company can also customize the spacing according to customer requirements, ensuring that the supplied air carries an appropriate amount of fine water droplets, thereby enhancing the air-conditioning system’s cooling and humidifying performance.

Maintenance and Management: During daily operations, regular observation and inspection should be conducted at the air outlet. If any large water droplets are found overflowing, the cause should be promptly investigated or adjustments made to correct the excessive spacing between the water guide plates. Leaks around seals should also be repaired immediately, as should any existing leaks or seepages. Clogged fiber dust in the condensate pan and drain pipe must be removed to ensure unobstructed drainage and maintain normal operation. During operation, the unit should be stopped weekly or monthly and rinsed with a water jet. Waterstop Fiber dust and impurities that have accumulated in the gaps are removed to keep them clean and unobstructed. Annually or... After 2-3 years, the baffle should be reinstalled, cleaned, and replaced with individual damaged baffles. The waterstop is made of fiberglass reinforced plastic and ABS material.

Shanghai Airking Air Equipment Co., Ltd Specifically provides complete sets for textile mills. Textile air conditioning The company has now evolved into a well-known domestic manufacturer of textile air-conditioning and automatic control equipment, offering services that encompass system design, manufacturing, installation, and commissioning. Currently, its business scope has expanded to include synthetic fibers and nonwoven fabrics. ETO sterilization, preheating room, analysis room, and medical specialties—producing the materials required for them. Textile factory Dust removal Equipment ( Multi-tube honeycomb dust removal, textile dust filtration 、 Waterstop 、 Axial-flow fan 、 Stainless steel spiral nozzle 、 Rotary drum filter etc.), Spray chamber Equipment ( Spray drainage )、preheating room equipment (can allow Textile factory cooling ), ventilation equipment (Aijin air conditioning, textile air conditioning), and more.