Textile factory workshops have numerous machines that generate substantial heat during operation, leading to high temperatures, stuffy and humid conditions, excessive flying fibers, and poor air quality—conditions that seriously affect workers' health. Therefore, textile factory cooling equipment can effectively address the current issues of high temperatures, stuffiness, and airborne fibers by promoting rapid air convection and exchange, ensuring a continuous influx of fresh air into the workshop and thus creating a cool and comfortable working environment. For example, after installing negative-pressure fans and misting systems, Textile factory cooling Can reach an average workshop temperature of 30-32 Between degrees, the air is fresh, cool, and comfortable. It’s low-cost, maintenance-free, and highly effective.

Characteristics of the rapid cooling effect of the water curtain inside the spray system:

Utilizing a water curtain cooling system from spray nozzles, the principle of heat absorption through water evaporation, and the principle of negative-pressure ventilation, this system eliminates waste gases and stale air within the factory building, thereby alleviating the effects of high temperatures and stuffy conditions.

After installation, it can effectively improve the humid and hot environment in the factory. 10 Quickly within minutes let Textile factory cooling (High-temperature environment) 32-45 ℃), the temperature is maintained at 26-30 ℃. This is a comfortable working environment for the human body, which can enhance employee productivity and maintain high product quality. Its cooling, ventilation, and air exchange effects can effectively address... 95 % -99 The issue of high temperatures, stuffy, and polluted air.

Ventilation features: Indoor and outdoor air are exchanged via negative-pressure exhaust ventilation. All hot and polluted air inside the Jingjiang industrial fans is exhausted from the plant area, while fresh air naturally flows in. Based on the actual conditions of the factory building, our ultra-environmentally friendly equipment calculates the required air exchange rate and volume per hour and then performs chemical adjustments to effectively address issues such as high temperatures, stuffiness, and poor air quality.

To ensure cooling performance, Textile factory cooling The selection of equipment is extremely important. Choosing appropriate and cost-effective cooling equipment for textile mills is a strong guarantee of effective workshop cooling. Therefore, before purchasing cooling equipment for a textile mill, factories must first determine the required air exchange rate and the number of units needed. This involves understanding the calculation methods for the number of air changes and the number of units required for negative-pressure fans in various types of textile mill environments, as well as the specific air exchange rate parameters applicable to different settings. :

1. The general environmental requirement for air exchange rate is: 25-30 Next / Hour.

2. In crowded public places, the required air exchange rate is: 30-40 Next / Hour.

3. For production workshops equipped with cooling systems in textile mills, the required air exchange rate is per hour. 40-50 Next.

4. For production workshops with high temperatures and severe pollution, it is required to adjust the air volume every hour. 50-60 Next.

5. In the humid southern regions, the frequency of ventilation should be appropriately increased, while in the hot and dry northern regions, the frequency of ventilation can be appropriately reduced.