Flood prevention Waterstop Also known as flood-control panels, waterproof panels, floodgates, sluice gates, waterstop boards, water-retaining walls, waterstop doors, flood barriers, modular flood walls, and more, their primary function is to prevent water from... Enter areas that require waterproofing and protect entrances and exits that need to be waterproofed, such as basements, warehouses, stores, riverbanks, underground shopping malls, and the like. After years of continuous improvement and upgrades, we now have mature flood-control products that can effectively prevent rainwater from entering.

   The aluminum alloy flood barrier is a custom-made product. They are rigorously installed and customized on-site. Since this is a custom-made product, the on-site installation plan must be confirmed for each production run, and the production cycle will be adjusted according to on-site requirements.

   The bottom is fitted with a sealant to allow flexible adaptation to the ground. Combined with the weight of the flood barrier itself, this ensures a better seal against the ground. Overlapping sections between adjacent flood barriers are also equipped with rubber seals. The connecting plate is also used for reinforcement, enabling the waterproof panel to achieve a better leak-proof effect.

   Each flood barrier can be customized on the backwater side of the support frame. The support frame and baffle are connected by bolts to form a triangular support surface, which makes the baffle’s water plate more stable and improves its sealing performance.

  1 The structure of the flood-control waterstop must be sufficiently stable.

   A properly designed waterstop gate must have a sufficiently stable structural design. If the structure’s configuration is not stable enough, the waterstop will find it difficult to perform its intended function. In the event of a flash flood, we will face the following highly complex situation. Only sufficient stability can cope with various flash floods.

  2 The selected materials should have sufficient waterproof performance.

   We need to understand that the primary function of a flood barrier is to protect our lives and property from damage during floods. If the flip cover material itself doesn't close properly, its effectiveness will be greatly reduced. Therefore, the baffle we choose must be made of materials that are flood-resistant, moisture-proof, and waterproof. Only such materials can provide us with the ideal flood-control effect.

  3 Ensure that the operation of the flood barriers is simple enough.

   Ordinary people also use waterstop panels to protect their lives and property. This means that the operation of flood-control products cannot be too complicated; otherwise, ordinary people will find it difficult to access and get started. Moreover, in an emergency, they won't know what to do, which could only make matters worse.